Motor De Aire Comprimido / Compressed Air Motor 3D Printer Model
The file 'Motor De Aire Comprimido / Compressed Air Motor 3D Printer Model' is (skp,stl) file type, size is 3.7MB.
The file 'Motor De Aire Comprimido / Compressed Air Motor 3D Printer Model' is (skp,stl) file type, size is 3.7MB.
Motor de pistón de doble efecto de accionamiento mediante aire comprimido. Aparte de las piezas de plástico se necesitan varillas de acero de 8 mm y 4 mm, tornillos y tubo de PVC para la camisa del cilindro y el distribuidor.
Double acting piston motor with compressed air drive. Apart from the plastic parts, 8 mm and 4 mm steel rods, screws and PVC pipe are required for the cylinder liner and distributor.
| biela.skp | 73.4KB | |
| biela.stl | 135.1KB | |
| brida-del-cilindro.skp | 352.4KB | |
| brida-del-cilindro.stl | 1.2MB | |
| caballete-vertical.skp | 144.6KB | |
| caballete-vertical.stl | 456.7KB | |
| cilindro.skp | 396.8KB | |
| cilindro.stl | 1.3MB | |
| collar-de-excentrica.skp | 77.4KB | |
| collar-de-excentrica.stl | 149.6KB | |
| conjunto-del-motor.skp | 3.3MB | |
| conjunto-del-motor.stl | 10.5MB | |
| culata.skp | 398.8KB | |
| culata.stl | 1.3MB | |
| excentrica.skp | 63.9KB | |
| excentrica.stl | 90.7KB | |
| manivela-ciguenal.skp | 69.4KB | |
| manivela-ciguenal.stl | 120.3KB | |
| piston-distribuidor-aire.skp | 87.2KB | |
| piston-distribuidor-aire.stl | 189.9KB | |
| piston.skp | 109.6KB | |
| piston.stl | 259.9KB | |
| separador-eje-8mm.skp | 54.5KB | |
| separador-eje-8mm.stl | 50.6KB | |
| soporte-cilindro.skp | 1.0MB | |
| soporte-cilindro.stl | 730.7KB | |
| soporte-rodamiento-8mm.skp | 99.2KB | |
| soporte-rodamiento-8mm.stl | 240.9KB | |
| tapa-de-culata-corta.skp | 108.5KB | |
| tapa-de-culata-corta.stl | 275.3KB | |
| tapa-de-culata-larga.skp | 108.8KB | |
| tapa-de-culata-larga.stl | 265.4KB | |
| travesano-de-union.skp | 86.8KB | |
| travesano-de-union.stl | 194.1KB | |
| volante.skp | 119.0KB | |
| volante.stl | 339.3KB |
