Its a fairly well built case, all the holes line up perfectly. I made sure it was thick enough to withstand a drop from 5-6'... It does offer two variations, the first is just a plain case and the other file you can use to better lock the phone into the case if you wish. i couldnt find a good way to adhere the top to the bottom other than a 3D printer pen/super glue. Just be catious with the glue. the case BOTTOM is tall enough you can also print the two as one and pause the print long enough to slip the device in then let it print the top section without the nozzle touching the phone in any way. If you have any questions or concerns let me know and i do have the STEP ill provide if needed.
Disclaimer: I AM NOOOOOOT RESPONSIBLE IF YOUR PRINTER IS OUT OF WHACK AND YOU END UP WITH ANY DAMAGES OR INCONVIENCES. THIS IS A TESTED DESIGN I USED TO MAKE ALL 4 OF MINE.
| MotoG5stylus2024BOTTOM.stl | 625.3KB | |
| motog5stylus2024TOP.stl | 296.0KB |
