Made this small acclimation box for fish. 13cm x 13 cm x 23 cm
Need also 4 piece of 2mm plexiglass:
2: 115x118mm
2: 115 x219mm
Just slide the piece of plexiglass in, put the second printed half on top and is done. You can add some glue if you want but isn't really needed.
The top cover has clips to open and close.
| cage.stl | 214.4KB | |
| cage_1.stl | 263.8KB | |
| cage_2.stl | 94.7KB |
