With a water reservoir, the drip rate can be adjusted using a screw. Good for Monstera and other large plants.
Erverything ist printable without support.
Threads:
M48x5 (Pole, Reservoir, Anker)
M10x1.5 (Screw, Reservoir)
Update:
A mesh insert for the anchor to help the moss hold better, and an anchor with an integrated mesh.
Update:
Modification to the threads of the reservoir and the pole for less work after printing.
Print settings:
I print the threads at 0.12mm layer height and the rest of the parts at 0.28mm, but 0.2mm for everything has also worked well.
| Anker.stl | 183.5KB | |
| Anker_Mesh.stl | 215.4KB | |
| Mesh.stl | 53.2KB | |
| Pole_V2.stl | 2.8MB | |
| Reservoir_Lid.stl | 201.2KB | |
| Reservoir_Screw.stl | 372.1KB | |
| Reservoir_V2.stl | 1.5MB |
