More Spiralized Modular Drawers 3D Printer Model
The file 'More Spiralized Modular Drawers 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'More Spiralized Modular Drawers 3D Printer Model' is (stl) file type, size is 3.4MB.
I remixed this design to create a variety of different shaped and sized drawers that would interlock using the same system. The drawers are divided in to two sets by length, 120mm and 60mm. For each length there are also drawers based on the number of interlocking tabs they have. For example, 2x2, 2x4, 4x4, all the way up to very tall or wide drawers like 12x2. Also included are some drawer dividers and a tray for printer nozzles.
| 12x2_120_Draw.stl | 14.1KB | |
| 12x2_120_Shell.stl | 6.2MB | |
| 12x2_60_Draw.stl | 15.1KB | |
| 12x2_60_Shell.stl | 3.4MB | |
| 2x12_120_Draw.stl | 43.1KB | |
| 2x12_60_Draw.stl | 43.1KB | |
| 2x2_120_Draw.stl | 14.7KB | |
| 2x2_120_Nozzle_Tray.stl | 259.8KB | |
| 2x2_120_Shell.stl | 1.8MB | |
| 2x2_60_Draw.stl | 22.8KB | |
| 2x2_60_Shell.stl | 1017.1KB | |
| 2x4_120_Diagonal_Divider.stl | 71.0KB | |
| 2x4_120_Draw.stl | 19.6KB | |
| 2x4_120_Ex_Divider.stl | 154.8KB | |
| 2x4_60_Draw.stl | 27.1KB | |
| 4x2_120_Draw.stl | 14.1KB | |
| 4x2_120_Shell.stl | 2.7MB | |
| 4x2_60_Draw.stl | 18.1KB | |
| 4x2_60_Shell.stl | 1.5MB | |
| 4x4_120_Diagonal_Divider.stl | 101.1KB | |
| 4x4_120_Draw.stl | 20.0KB | |
| 4x4_120_Ex_Divider.stl | 220.2KB | |
| 4x4_120_Shell.stl | 3.6MB | |
| 4x4_60_Draw.stl | 22.3KB | |
| 4x4_60_Shell.stl | 1.9MB |
