More Accurate 10mm Pistol 3D Printer Model
The file 'More Accurate 10mm Pistol 3D Printer Model' is (STL) file type, size is 329.6KB.
The file 'More Accurate 10mm Pistol 3D Printer Model' is (STL) file type, size is 329.6KB.
Just extracted the model(s) from the game itself so there are alot of gaps to fill and geometry to unfuck for the good of printing, just putting it out for those who wanna help
Mods available right now:
Barrel:
Magazine:
Sights:
Grip:
todo:
__OLD STUFFS
***UPDATE 10/16/15: Split magazine into two attachable pieces for easier printing
***UPDATE 10/12/15: REDONE THE OPENING IN THE GRIP AND FIXED THE GAP IN THE MAGAZINE
***UPDATE 10/8/15: PROPERLY SCALED THE GRIP AND MAG TO BE THE EXACT SAME SIZE AS THE ORIGINAL AUTHOR'S FILE
I made a basic division between the mag and grip that should fit tightly when printed.
Feedback is greatly appreciated
I made some tweaks to the Reciever.STL with the best of my ability so that the rear sight and frame of the viewing end of the slide is more in proportion the image provided
I am not the best at editing in 3dsmax so the edited edges may not be that smooth, but a good sanding after printing should smoothen out the edges to be more like the picture
It shouldn't conflict with other pieces for the rest of the pistol
| Example.STL | 292.4KB | |
| Fo410mmPistol_EXTENDED_MAG.STL | 6.9KB | |
| Fo410mmPistol_LIGHT_PORTED_BARREL.STL | 49.7KB | |
| Fo410mmPistol_MAG_RELEASE.STL | 4.9KB | |
| Fo410mmPistol_MARKSMAN_GRIP.STL | 33.4KB | |
| Fo410mmPistol_RECEIVER.STL | 85.4KB | |
| Fo410mmPistol_RECEIVER_THINGIES.STL | 18.4KB | |
| Fo410mmPistol_REFLEX_SIGHT.STL | 18.8KB | |
| Fo410mmPistol_SELECTOR_SWITCH.STL | 7.3KB | |
| Fo410mmPistol_SLIDE.STL | 54.6KB | |
| Fo410mmPistol_SLIDE_HAMMER.STL | 4.8KB | |
| Fo410mmPistol_SUPPRESSOR.STL | 20.6KB | |
| Fo410mmPistol_TRIGGER.STL | 1.7KB | |
| Fo410mmPistol_TRIGGER_GUARD.STL | 5.2KB | |
| Fo4_10mmPistol_ALL_IN_ONE.STL | 292.4KB |
