More 32mm Industrial Base Toppers --part2
I needed a thin base topper that I could glue to the top of a fender washer. I line a tote with rubberized magnetic sheets and the minis stay upright. Well, as long as you don't tip the box over.
I also added a pre supported file. I will not guarantee that these will work for your printer, but they do with mine. Of course, I am using a DLP printer. If you have an FDM printer, they should still work but don't use the pre supports.
For FDM use the unsupported files. For DLP resin, you can use the supported or the unsupported if you like to support your own.
This can be used for miniature table top games set in a Dystopian, Modern or Future World. This can be used for RPGs, table top miniatures games, dioramas, or photography scenes. The sky is not a limit.
Can be used for games like Pulp Alley, Realitys Edge, 5 Parsecs From Home, Cyberpunk, Stargrave, Fist Full of Lead, This is Not a Test, Zona Alpha etc.
| 32mm_industrial_toppers_4.stl | 183.7KB | |
| 32mm_industrial_toppers_5.stl | 177.6KB | |
| 32mm_industrial_toppers_6.stl | 84.9KB | |
| 32mm_industrial_toppers_7.stl | 82.1KB | |
| 32mm_industrial_toppers_8.stl | 101.2KB | |
| _supported_32mm_industrial_toppers_4.stl | 3.5MB | |
| _supported_32mm_industrial_toppers_5.stl | 3.1MB | |
| _supported_32mm_industrial_toppers_6.stl | 2.7MB | |
| _supported_32mm_industrial_toppers_7.stl | 2.6MB | |
| _supported_32mm_industrial_toppers_8.stl | 2.4MB |
