Mop Handle To Acme Broom Handle Adapter 3D Printer Model
The file 'Mop Handle To Acme Broom Handle Adapter 3D Printer Model' is (3mf,stl) file type, size is 214.5KB.
The file 'Mop Handle To Acme Broom Handle Adapter 3D Printer Model' is (3mf,stl) file type, size is 214.5KB.
This is a remix, thank you to the original designer because I could not figure out how to design Acme threads in Fusion 360.
I needed a new handle for my shop broom. I had an old mop handle that used a spring clamp design to hold a disposable cotton mop head. After removing the clamp I had a nice, long handle with two holes ready to accept an adapter. The through bolts are M6x50mm but 45mm bolts might work.
I printed the threads at 100% infill for strength and the rest of the body at 25%. Sliced using PrusaSlicer and printed out of HT-PLA+. So far it has held up fine.
I have included my config file for PrusaSlicer. Print the big end on the build plate, you should not need any supports.
| acme_thread_handle_adapter_final.3mf | 91.4KB | |
| broom_handle_end_STL.stl | 318.0KB |
