MoonMooncake 3D Printer 3D Printer Model
The file 'MoonMooncake 3D Printer 3D Printer Model' is (zip,STL) file type, size is 93.2MB.
The file 'MoonMooncake 3D Printer 3D Printer Model' is (zip,STL) file type, size is 93.2MB.
A blog post on why I did it ✌😁
Made from Hypercube parts and remix CoreXY Frame (v.2.0)
Specifications:
Print size: 235x235x235mm;
Print speed: >100mm/s;
Acceleration: 10000 mm/s^2;
Firmware: Klipper.
Buy parts:
BOM
| config-20240828-194747.zip | 6.0KB | |
| MoonCake_3D_printer25.08.2024.zip | 85.4MB | |
| PRT-116_Multi_body__dual_drive_extruder_X_carriage.STL | 9.2MB | |
| PRT-120_Default_fun_duct.STL | 2.8MB | |
| PRT-121_Default_Fan_duct.STL | 1.5MB | |
| PRT-124_Default_Clever.STL | 561.6KB | |
| PRT-125_Default_Left_belt_tensioner.STL | 544.2KB | |
| PRT-126_Default_Left_motor_mount.STL | 1.2MB | |
| PRT-126_Remake_HYPERCUBE_v2_Left_motor_mount.STL | 1.3MB | |
| PRT-127_Default_Right_motor_mount.STL | 1.2MB | |
| PRT-127_Remake_Hypercube_v2_Right_motor_mount.STL | 1.2MB | |
| PRT-128_Default_Right_belt_tensioner.STL | 542.1KB | |
| PRT-129_Default_Handles.STL | 3.9MB | |
| PRT-130_Default_sleeve.STL | 365.1KB | |
| PRT-133_Default_X_bot_mount_upper.STL | 564.3KB | |
| PRT-134_Default_X_bot_mount_bottom.STL | 3.0MB | |
| PRT-135_Default_X_idle_pulley_mount_right_bottom.STL | 648.3KB | |
| PRT-136_Default_X_idle_pulley_mount_right_upper.STL | 521.6KB | |
| PRT-137_Default_X_idle_pulley_mount_left_bottom.STL | 683.6KB | |
| PRT-138_Default_X_idle_pulley_mount_left_upper.STL | 473.7KB | |
| PRT-142_Default_Upper_X_carriage.STL | 1.2MB | |
| PRT-143_Default_Lower_X_carriage.STL | 3.2MB | |
| PRT-144_Default_Hotend_clamp.STL | 3.8MB | |
| PRT-145_Default_3d_touch_mount.STL | 362.1KB | |
| PRT-146_Default_Extruder_mount.STL | 819.0KB | |
| PRT-148_M10_PTFE_holder.STL | 1.8MB | |
| PRT-148_M3_PTFE_holder.STL | 1.7MB | |
| PRT-148_M6_PTFE_holder.STL | 1.7MB | |
| PRT-31_Left_Bed_Support.STL | 236.9KB | |
| PRT-31_Right_Bed_Support.STL | 236.6KB | |
| PRT-33_Default_DC_holder.STL | 2.0MB | |
| PRT-38_multibody_Lcd_case.STL | 1.9MB | |
| PRT-41_Multibody_X_bot_plate.STL | 3.5MB | |
| PRT-42_Multi_body_Left_X_idle_pulley_mount.STL | 1.1MB | |
| PRT-42_Multi_body_Right_X_idle_pulley_mount.STL | 1.1MB | |
| PRT-45_L_Y_idle_pulley_mount.STL | 5.8MB | |
| PRT-45_R_Y_idle_pulley_mount.STL | 5.8MB | |
| PRT-46_Default_Z_bed_holder.STL | 3.0MB | |
| PRT-50_Default_Z_Motor_holder.STL | 6.9MB | |
| PRT-52_Default_Z_nut_mount.STL | 866.1KB | |
| PRT-65_Lower__multi_body__Electronic_box.STL | 4.2MB | |
| PRT-65_Upper_multi_body_2_Electronic_box.STL | 5.3MB | |
| PRT-65_Upper_multi_body__Electronic_box.STL | 5.3MB | |
| PRT-69_Default_Power_supply_case.STL | 354.4KB | |
| PRT-69_MirrorDefault_Power_supply_case.STL | 203.4KB |
