Smaller moon globe lamp, about 100mm diameter. Uses 4AA batteries to power one LED segment of 5V LED strip.
You will need to use supports through the opening in the bottom. I kept a 5mm horizontal offset from part to make sure there is good separation from the threads. I suggest using several layers of dense supports if your slicer supports them. If you're lucky and have good separation between supports and object the supports will remove in one piece. If the dense support layers remain attached to the top of the globe a large hemostat will make it easier to remove these supports.
Battery Holder: https://www.amazon.com/gp/product/B073JFGJTJ
5V LED Strip: https://www.amazon.com/gp/product/B01G572BEO
Screws that are handy to have: https://www.amazon.com/gp/product/B01GBLNBOI
Handy hemostat kit: https://www.amazon.com/gp/product/B01MQ3G2QW
Remix from: https://www.thingiverse.com/thing:2032190
| Battery_Retainer.stl | 29.8KB | |
| MoonGlobeWithAdapter.stl | 91.4MB | |
| Moon_Globe_Base.stl | 1.3MB |
