Moon Book Nook 3D Printer Model Free Download

Description Files (20)

Summary

This is a slightly improved design I made for my Moon's Surface book nook pictured, it uses fiber optics to move the light from some bright white pre wired flickering LEDs that are in the base into some laser cut perspex that has star configurations from the northern hemisphere.

Things I used,

Around 30 meters of 0.75mm fiber optic cable,
6 pre wired 12v flickering 3mm bright white leds, i had these on hand but 5mm would be better.
a usb to 12v cable/converter, its got the boost circuit built into the usb connector.
3mm black acrylic the design fits on 2 a 4 sheets
3mm plywood for the outside this needed 3 or 4 sheets
this design will need some m3 or m4 screws
semi flexible glue for connecting the fiber optics,
heatshrink to connect the leds to the fiber optics
electrical tape for the led connections
k40 laser cutter
i3 clone 3d printer
elegoo mars pro- not needed but i used it for the frame because it was new

back_inner.dxf	11.2KB
back_out.dxf	2.9KB
bottom.dxf	2.2KB
frame_back_left.stl	231.7KB
frame_back_right.stl	231.7KB
frame_back_top.stl	2.6KB
frame_front_left.stl	12.6KB
frame_front_right.stl	12.6KB
frame_front_top.stl	2.4KB
frame_top_left.stl	44.1KB
frame_top_right.stl	49.9KB
left_inner.dxf	8.9KB
left_out.dxf	2.8KB
little_rocket.stl	1005.4KB
Moon_book_nook.f3d	1.9MB
Moon_surface.stl	4.7MB
right_inner.dxf	13.6KB
right_out.dxf	2.8KB
top_inner.dxf	7.4KB
top_out.dxf	2.7KB

Moon Book Nook 3D Printer Model

Summary

Tags

You might also like