Moon Board Game Deluxe Edition Boxes For Sleeved Cards 3D Printer Model
The file 'Moon Board Game Deluxe Edition Boxes For Sleeved Cards 3D Printer Model' is (stl) file type, size is 103.4KB.
The file 'Moon Board Game Deluxe Edition Boxes For Sleeved Cards 3D Printer Model' is (stl) file type, size is 103.4KB.
This is designed for the deluxe edition including the expansion, although I don't see any reason you couldn't store the cardboard resources in the boxes as well.
The boxes that came with the deluxe edition of Moon drove me crazy because they were too wide for the box for rules to fit in nicely.
The boxes are sized to match sleeved cards so that the cards are protected properly by the boxes.
I suggest putting one box in the middle and one on each end.
Print each box once, and the lid three times. You may need to scale the lid very slightly for your printer. On my Bambu A1 with Matte PLA, the lids stay on well but are not difficult to remove.
The resource and rover boxes are taller than the hearts box because when I printed them at 25mm height (the heart box) there wasn't quite enough room. As you can see in the photo, they all fit in the box fine, but if you wanted more space, you could scale them down (in height only) a tiny bit, closer to 30mm or so if you wanted to.
| Moon_Hearts.stl | 112.2KB | |
| Moon_Resources.stl | 113.9KB | |
| Moon_RoversAndRockets.stl | 57.7KB | |
| Moon_SharedLid.stl | 132.3KB |
