MonsTRX4m High Trail Body Mount 3D Printer Model
The file 'MonsTRX4m High Trail Body Mount 3D Printer Model' is (stl) file type, size is 269.0KB.
The file 'MonsTRX4m High Trail Body Mount 3D Printer Model' is (stl) file type, size is 269.0KB.
Traxxas Trx4m High Trail body mounts for Furitek Rampart chassis. These mounts will allow the user to utilize the factory TRX4m bumpers with integrated body mounts and factory hardware extended to the proper length to fit the Rampart chassis. This allows the K10 and F150 body to clip right in place. Trx4m axle links and drive shafts will be required for proper wheelbase.
Due to the angle on the front of the Rampart chassis, the front mount has had the chassis side bolt holes purposely left blank to allow for builder placed bolt holes for final fit adjustments. I line the mount up to the center of the second hole in the middle row of the Rampart chassis. You can drill your mounting holes in the first hole of the top and bottom row of the chassis. I used a 5/64 drill bit and ran the bolts in to create threads in the plastic prior to final mounting.
| MonsTRX4mBack.stl | 548.1KB | |
| MonsTRX4mFront.stl | 520.6KB |
