The main box/storage system here is not really a printable thing. This was simply a model for me to take measurements from to build this out of wood. There were some requests to share the file so I'm sharing it here.
It is a box to hold the monsters for Frosthaven. The individual monster storage boxes are from this thing: https://www.thingiverse.com/thing:5830607
I did have to modify the boss monster box from @gudyx's design to better fit my organizer since his design intended the boxes to be stored directly against each other vs. my solution with a 1/8" divider between boxes (his design in the one seen in the picture and you can see the gaps around it, I forgot to take a picture after replacing it with mine). So his boss box was exactly 2x the depth and width of the regular monster boxes and mine needed to have an addition 1/8" in width and depth to fully fill the cavity it sits in. I did also model in a card holder slot inside the boss box with some standoffs inside the slot to make the cards easier to grab.
I also designed a holder for the monster standee stands that fits in the same size slots as the monster storage boxes. The model has three channels on it that I inserted a strip of rubber into which the stands then grip onto. I had a sheet of rubber that was originally purchased as a workbench worktop liner and used the cutoff for this purpose. You could just as easily print small strips of TPU to serve the same purpose.
I didn't design any of this with the intent to share and others to replicate so you may need to make modifications to suit your needs if you attempt to make use of this stuff.
This reddit thread has a little more info on the project:
https://www.reddit.com/r/Gloomhaven/comments/1cp0doz/monster_storage/
Thanks for looking.
BossBox.stl | 10.4KB | |
BossBoxLid.stl | 7.7KB | |
Frosthaven_Boss_Box_v2.f3d | 3.3MB | |
Frosthaven_Monster_Standee_Holder_Rack_v3.f3d | 99.6KB | |
Frosthaven_Tabletop_Organizer_v7.f3d | 556.7KB | |
MonsterStandee_Holder_Rack.stl | 29.0KB |