for the Pi case i used 0.4 walls or 1 shell. then 100% infill. i did these settings so that there is little to no hollow spots along the case walls.
for the mount you can use any settings you'd like.
x4 20mm screws attach the fan to the case
x4 16mm screws attach the top to the bottom of the case
x4 6mm screws attach the Pi to the case
x4 6mm screws attach the case to the mount
| MP_Mini_PI_Mount.stl | 69.4KB | |
| MP_Mini_PI_Mount_v2.stl | 425.2KB | |
| PI_Case_Bottom.stl | 813.7KB | |
| PI_Case_Top.stl | 227.2KB |
