Monoprice Mini Delta Shield / Filler Plate 3D Printer Model
The file 'Monoprice Mini Delta Shield / Filler Plate 3D Printer Model' is (stl) file type, size is 4.1KB.
The file 'Monoprice Mini Delta Shield / Filler Plate 3D Printer Model' is (stl) file type, size is 4.1KB.
This filler plate is created to snap on to the interior of the Monoprice delta 3d printer leg area to fill and cover the gap at the base of the control arms. The plate can be scaled in your slicer of choice to make of for any shrinkage depending on the PLA brand your using. If using ABS it will need to be scaled up to account fro shrinkage.
For best results if printing on your Delta use the following settings:
Fine 0.1 resolution
Layer height 0.1
Top/bottom height 0.4
Wall / top thickness 0.8
Infill 20%
Print temp 180
Bed temp 50
Flow 95%
Retraction distance 4, speed 60
Print speed 60
(if using a glass plate, adhesion - skirt)
| Delta_filler_plate_RW_5.0.stl | 18.1KB |
