Monkey Trophy Statue – Learning Award 3D Printer Model
The file 'Monkey Trophy Statue – Learning Award 3D Printer Model' is (STL,stl) file type, size is 3.2MB.
The file 'Monkey Trophy Statue – Learning Award 3D Printer Model' is (STL,stl) file type, size is 3.2MB.
Remixed from Ratherwok, see the original monkey: Original monkey
This remix adds a pillar and base that matches the block that the original monkey sits on.
I used a raft for adhesion to print both main parts, but may not be necessary for the trophy base.
You should be able to get away with 10% infill for the base and 20% for the monkey.
The tail is just a length of filament like in the original, however is not a snug fit as the monkey is scaled up to 140% of the original. I used a hair dryer to curl the filament into the tail.
I recommend glue for putting the parts together, and I had to use blu-tac for the tail.
If you liked the design, please upload your make, otherwise I'd be grateful if you left a comment! It'd be nice to know if this design came in handy for anyone
| ear1.STL | 397.8KB | |
| ear2.STL | 397.9KB | |
| monkey.stl | 14.4MB | |
| Monkey_statue_joined.stl | 2.9MB | |
| statue_base_-_blank.stl | 8.9KB | |
| statue_base_-_learning_award.stl | 379.8KB |
