The file 'Monkey Skull II 3D Printer Model' is (3mf,stl,gcode) file type, size is 36.2MB.
The skull of a monkey, x-rayed and made of smoke.
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA BambuLab Matte Charcoal (I've used Dark Blue) Transmission Distance: 0.8
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 10
PLA BambuLab Matte Ash Gray Transmission Distance: 10
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal (I've used Dark Blue)
At layer #3 (0.72mm) swap to Slate Gray Sparkle
At layer #5 (1.12mm) swap to Ash Gray
At layer #8 (1.72mm) swap to Ivory White for the rest.
Happy printing, and share your make!
| Monkey_Skull_II_by_TheMazePrinter.3mf | 19.2MB | |
| Monkey_Skull_II_by_TheMazePrinter.stl | 95.4MB | |
| Monkey_Skull_II_by_TheMazePrinter_Front_200x200_PLA_1h46m.gcode | 8.1MB |
