Monitor Stand/Riser 200mm Diameter 3D Printer Model
The file 'Monitor Stand/Riser 200mm Diameter 3D Printer Model' is (STL) file type, size is 3.0MB.
The file 'Monitor Stand/Riser 200mm Diameter 3D Printer Model' is (STL) file type, size is 3.0MB.
I started a new job and the desk came with two monitors that sat 3-4 inches below my normal view level. I decided to design a modular riser with removal storage options. My printers have 200mm X and Y strokes so this maxes out my ability to print. I ended up quartering several of the parts with tongue and groove slots to reduce the print time and curling.
This could be made to any height, but the revolving portion was only designed for the stack shown in the images. You could add more, but I haven't made alternate height buckets or shelf parts.
This is 84mm tall fully built. The bucket will hold a pen and still swing under the monitor I have. It will hold twelve modular shelves, but I only printed the bucket and USB style so far.
UPDATE: 06/11/2022 - I uploaded a correctly sized MonitorShelfRack (V2). I originally was going to make this taller than it ended up being and I must have uploaded the older version file.
| MonitorShelfBucket-USB.STL | 661.3KB | |
| MonitorShelfBucket_Cup.STL | 263.8KB | |
| MonitorShelfBucket_DoubleShelf.STL | 755.4KB | |
| MonitorShelfBucket_TallShelf.STL | 335.9KB | |
| MonitorShelfRack_Split.STL | 363.1KB | |
| MonitorShelfRack_V2.STL | 1.1MB | |
| MonitorShelf_Keys.STL | 944.3KB | |
| MonitorStand.STL | 750.4KB | |
| MonitorStandStack-Split.STL | 329.4KB | |
| MonitorStandStack-TOP.STL | 793.7KB | |
| MonitorStandStack-TOP_SPLIT.STL | 271.9KB | |
| MonitorStandStack.STL | 1.0MB |
