Monitor Lamp 3D Printer Model
The file 'Monitor Lamp 3D Printer Model' is (stl) file type, size is 115.6KB.
The file 'Monitor Lamp 3D Printer Model' is (stl) file type, size is 115.6KB.
MONITOR LAMP is a simple lamp based on the model of a well-known brand which is placed in the upper area of the monitor.
It consists of a central area where a mini-arduino can be added to control a neopixel led strip.
A pivoting central area to adjust the inclination of the light beam.
The lighting area is made up of two arms that fit into the central pivoting area and two side trims.
Also included are two types of adjustments for the back of the monitor. Since the center of gravity is in the front area of the lamp, it tends to pivot forward. Depending on the thickness and back shape of the monitor, the fit may or may not be suitable.
Knowing the thickness of your monitor, you can include a second leg in the central area and do without the adjustment arm. Probably add this option in the future.
In a new version, I will try to modify the central area to avoid the leg of the adjustment arm. In addition to including space to locate buttons to add functions with mini-arduino.
Printing...To avoid supports, I recommend printing the arms vertically using raft.
The rest of the pieces, except the side covers, require supports, including the diffuser.
For the central area, the ideal is to use custom supports to avoid filling up the cable passage.
As for the two sections of the diffuser, the geometry indicates 216.5mm in length, but the contraction of the PLA when cooling, can provide you with another final measure. I have chosen to include the 219mm diffuser because it is the contraction that best suits my material. However, with your slicer program, you can easily change this dimension.
It is necessary 4 screws of 2mm metric and 20mm long with their nuts for the pivot areas.
I advise using a led strip with 144 LEDs per meter without flickering.
| Custom_Supports_P3_Pivote_Total.stl | 369.7KB | |
| Raft_P3_Barra_Led_1_Final.stl | 69.0KB | |
| Skirts_P3_Tapa.stl | 13.4KB | |
| Supports_P3_Brazo_Final.stl | 64.7KB | |
| Supports_P3_Central_Tapa_Final.stl | 13.8KB | |
| Supports_P3_Difusor_Final_219mm.stl | 2.4KB | |
| Supports_P3_Pivote_Central_Final_Rectificado.stl | 92.3KB | |
| Supports_P3_Pivote_Total.stl | 138.5KB | |
| Supports_P3_ReBrazo_ReFinal.stl | 67.5KB |
