Monado With Moveing Parts 3D Printer Model
The file 'Monado With Moveing Parts 3D Printer Model' is (stl) file type, size is 384.9KB.
The file 'Monado With Moveing Parts 3D Printer Model' is (stl) file type, size is 384.9KB.
this should be a functioning moving pieces monado. I have not gotten to print it in full size yet though. you are expected to sauder some pieces together wherever theirs pin points
| 1in_by_.25in_peg_make_10_v1.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_10.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_2.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_3.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_4.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_5.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_6.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_7.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_8.stl | 29.7KB | |
| 1in_by_.25in_peg_make_10_v1_-_Copy_9.stl | 29.7KB | |
| alxe_pins_.25_by_.575_in_num_2.stl | 29.6KB | |
| alxe_pins_.25_by_.575_in_num_3.stl | 29.6KB | |
| alxe_pins_.25_by_.575_in_v1.stl | 29.6KB | |
| alxe_pins_.25_by_.575_num4.stl | 29.6KB | |
| axle_long_bottom_v1.stl | 17.5KB | |
| axle_long_bottom_v1_-_Copy.stl | 17.5KB | |
| axle_top_small_v1.stl | 20.2KB | |
| axle_top_small_v1_-_Copy.stl | 20.2KB | |
| bottom_blade_moveing_v1.stl | 98.8KB | |
| bottom_blade_tip_v1.stl | 27.8KB | |
| bottom_bottom_blade_middle_v1.stl | 13.4KB | |
| bott_om_blad_ebut.stl | 52.1KB | |
| Component56_v1.stl | 15.9KB | |
| long_handle_v1.stl | 29.2KB | |
| moabndo_top_blade_in_fornt_of_wheel_v1.stl | 54.6KB | |
| monando_top_pice_above_wheel_v1.stl | 26.1KB | |
| monaod_above_bottom_blade_tip_v1.stl | 49.7KB | |
| monaod_top_blade_above_middle_v1.stl | 58.3KB | |
| small_handle_v1.stl | 148.8KB | |
| top_nlade_tip.stl | 9.8KB | |
| wheel_v1.stl | 329.5KB |
