This Clip is based on the MOLLE (Modular Lightweight Load-carrying Equipment) system, but about 50% larger. Normal 1" scale clips are too weak to be reliable using 3D printed plastic. At this size they are big enough to clip onto a normal waist belt, and can carry significant load. These should attach to and standard nylon webbing of the correct width.
I measured various belts and found they range widely in width and thickness, typically 38mm (1.5") +/- 4mm, and 3-5mm thickness. The ease of attachment and removal depends heavily on these measures being well matched to the design, so I've provided 3 widths.
It has a large bolt mounting hole (8mm hole, 12mm head) and four screw holes (4mm recessed). This will allow a typical 1/4" nut and bolt for mounting a camera stabilizer or other fairly heavy gear.
The openings are slightly larger than the belt they should accommodate.
Small - 35mm
Medium - 39mm
Large - 44mm
| MOLLE_Clip_03_large.STL | 547.8KB | |
| MOLLE_Clip_03_medium.STL | 555.1KB | |
| MOLLE_Clip_03_small.STL | 570.9KB |
