Mold For Interlocking Blocks Of Cement Or Gypsum 3D Printer Model
The file 'Mold For Interlocking Blocks Of Cement Or Gypsum 3D Printer Model' is (stl) file type, size is 8.0KB.
The file 'Mold For Interlocking Blocks Of Cement Or Gypsum 3D Printer Model' is (stl) file type, size is 8.0KB.
There are two sets of identical blocks in this mold, which differ only in height.
HOW TO:
The first layer is laid from half-blocks and then each next layer half overlaps the previous one.
Dimensions of the big blocks
Height: 20 mm.
Width ( medium): 12 mm.
Length (medium): 30 mm.
Dimensions of the small blocks
Height: 10 mm.
Width ( medium): 12 mm.
Length (medium): 30 mm.
NOTE.
In block design adding an offset between blocks for easier connection.
Offset length: 0.2 mm.
The file contains both the mold itself and removable side parts.
All you need to do is attach the sides with paper clips.
Suitable for both SLA and FDM printing.
Recommended printing parameters:
FDM (filament):
Layer thickness: 0.1 - 0.2 mm.
SLA (Epoxy):
Layer thickness: 0.05mm
| v31.1.stl | 22.2KB | |
| v31.2.stl | 22.2KB | |
| v31.3.stl | 684.0B | |
| v31.4.stl | 684.0B |
