Mold For Concrete Road Barrier 3D Printer Model
The file 'Mold For Concrete Road Barrier 3D Printer Model' is (stl) file type, size is 3.0KB.
The file 'Mold For Concrete Road Barrier 3D Printer Model' is (stl) file type, size is 3.0KB.
File for casting a silicone mold from which you can make cement or gypsum bricks
This set contains both the main barrier and corner connections that help to create a barrier of almost any shape from separate parts of the barrier.
Contents:
Main barrier:
Height: 60 mm
Length: 100 mm
Width 24 mm
Corner connections:
Corner connection 90 degrees
Corner connection 30 degrees
The file contains both the mold itself and removable side parts.
All you need to do is attach the sides with paper clips.
Suitable for both SLA and FDM printing.
Recommended printing parameters:
FDM (filament):
Layer thickness: 0.1 - 0.2 mm.
Printing speed: depends on your printer.
SLA (Epoxy):
Layer thickness: 0.05mm
Z axis lift speed: 2 mm/sec.
| concreteBarrierBarV33.stl | 684.0B | |
| concreteBarrierV33.stl | 10.8KB |
