This is a Remix of a Moineau Extruder, to install in a P3steelV4 printer.
I made a few changes:
The inlet, has a hole to screw in a plastic coupler, I can't find that type of coupler, so I add a tube, to install a 8mm ID hose. Also this help to put the air pump and the tank away from the printer, and also use a bigger tank.
I create 3d printied gaskets, made with filaflex, so I can properlty seal the pieces.
All the credit to Ttsalo and Unfold, for his desing, this is a mix of both, with my own changes, please go to his desing and leave a like, Its always great the people showing somo love on your work.
| Agarre_Moineau_Extruder.STL | 98.9KB | |
| Inlet.STL | 398.0KB | |
| Junta_1.STL | 39.7KB | |
| Junta_2.STL | 80.6KB | |
| Junta_3.STL | 78.6KB | |
| moineau_stepper_motor_coupler.stl | 113.3KB | |
| moineau_stepper_nozzle_small.stl | 84.8KB | |
| moineau_stepper_rotor_small_coupled_cl04.stl | 1.8MB | |
| moineau_stepper_shaft.stl | 142.4KB | |
| moineau_stepper_stator_small.stl | 5.1MB | |
| stepperSpacerSeal11.stl | 77.1KB |
