The file 'Modular Wire Test Tube Racks 3D Printer Model' is (stl) file type, size is 2.1MB.
This wire rack is part of a set of modular racks for five different sizes of test tubes. Download the full set here: https://than.gs/m/988496
These “Modular Wire Test Tube Racks” are compatible with standard test tubes and with the “Spiralized Test Tubes” model linked below.
See here for video: https://youtu.be/Yl8F2EzHjo4
Models are provided for the following test tube sizes: 6ml (75x12mm), 10ml (100x13mm), 19ml (125x16mm), 36ml (150x20mm), and 55ml (150x25mm).
There are “3 Tube” and “5 Tube” version for each size.
To print a complete a rack, you will need to print one “Closed Shelf” and two each of the “Open Shelf” and “Side” files. Print as oriented, avoid using brim. Snap the pieces together as shown in the video with he “Closed Shelf” on the bottom and the “Open Shelves” on the top and middle. The “Side” pieces are compatible with either the “3 Tube” or “5 Tube” shelf versions.
The racks are compatible with these 3D printable Spiralized Test Tubes: https://than.gs/m/988494
6ml_75x12mm_3_Tube_Closed_Shelf.stl | 1001.0KB | |
6ml_75x12mm_3_Tube_Open_Shelf.stl | 1.1MB | |
6ml_75x12mm_5_Tube_Closed_Shelf.stl | 1.5MB | |
6ml_75x12mm_5_Tube_Open_Shelf.stl | 1.8MB | |
6ml_75x12mm_Side.stl | 367.4KB |