Modular Wall Mount Playing Card Deck Display 3D Printer Model
The file 'Modular Wall Mount Playing Card Deck Display 3D Printer Model' is (stl) file type, size is 31.1KB.
The file 'Modular Wall Mount Playing Card Deck Display 3D Printer Model' is (stl) file type, size is 31.1KB.
https://www.thingiverse.com/thing:6114589
Display your card decks!
This is a modular wall display for your decks of cards, where you can actually see the fancy box, rather than just the edge (although I've included an edge-style module).
The suits down the middle of the modules are intended to look nice AND serve as mounting points. As to how many mounts you'll need to use, that may be determined by how wide and tall you make the display. For example, my display currently has 18 decks, and I've used only two mounting screws at the top corners, and then a nail in one of the center holders just to keep from sagging.
NOTE: These are designed to snuggly fit most regular to high-end packs (e.g. Bicycle, Theory11, Hoyle, etc). If a deck does not fit snuggly, you might consider using the side displays, or print a wedge or something.
| book_style_wall_card_holder.stl | 66.8KB | |
| card_holder_bottom_edge.stl | 1.8KB | |
| card_holder_left_edge.stl | 1.8KB | |
| card_holder_right_edge.stl | 2.0KB | |
| card_holder_top_edge.stl | 1.8KB | |
| lower_left_finish.stl | 3.4KB | |
| lower_right_finish.stl | 3.4KB | |
| upper_left_finish.stl | 3.6KB | |
| upper_right_finish.stl | 3.6KB | |
| wall_card_holder.stl | 55.4KB |
