Modular Toys. Automata 3D Printer Model
The file 'Modular Toys. Automata 3D Printer Model' is (stl) file type, size is 1.4MB.
The file 'Modular Toys. Automata 3D Printer Model' is (stl) file type, size is 1.4MB.
Full instructions here, for step by step how to use it, please go here.
https://www.instructables.com/The-Most-Advanced-Open-Source-3D-Print-Modular-Blo/
To have the best experience using this system. make sure you have a calibrated 3D printer. Try to print the smallest block first. which is the 3x1 block, Measure the result using a caliper.
The holes on the block need to be 7mm. and the thickness is 4mm.
The tolerance is 0.1mm, if the result is +- more than 0.2mm then you need to calibrate your 3D printer first.
For the pins, I recommend using raft.
I use 0.2 layer height, speed 60mms,
| 16mm.stl | 506.7KB | |
| 3x1.stl | 150.3KB | |
| 48mm.stl | 940.2KB | |
| 4mm_Spacer.stl | 48.1KB | |
| 5x1.stl | 216.8KB | |
| 7x1.stl | 237.9KB | |
| 8mm_Spacer.stl | 232.2KB | |
| Blocky_Codes__PIN_Double_Head.stl | 732.7KB | |
| Joint_i_v2.stl | 355.6KB | |
| Joint_L.stl | 577.7KB | |
| Join_t.stl | 429.3KB | |
| Locking_Spacers_v2.stl | 499.6KB | |
| X.stl | 227.6KB |
