Modular Terrain Set (pipes And Walkways) 3D Printer Model
The file 'Modular Terrain Set (pipes And Walkways) 3D Printer Model' is (stl) file type, size is 13.6 MB.
The file 'Modular Terrain Set (pipes And Walkways) 3D Printer Model' is (stl) file type, size is 13.6 MB.
Please leave any feedback you might have. I'd also love to see these in action, so if you've used the files please share some pictures!
I've wanted to make a modular terrain set that went together with the Killzone Sector mechanicus.
To save precious PLA i wanted to make the set compatible with 20mm VP-pipes.
Suggestions on more parts are always welcome too!
I've been adding parts bit by bit an these are the parts I've made so far:
What I built so far:
What's on the to do list so far:
Disclaimer: All figures displayed are for scale purpuses only and have nothing to do with the actual 3d models.
| 90_degree_pipe.stl |
| Cross_connector_v.3.stl |
| Pipemaker_measurring_tool.stl |
| Pipe_endpiece_v.3.stl |
| Pipe_feet_GW_v3.stl |
| Pipe_feet_v.3.stl |
| Pipe_Ground_End.stl |
| Pipe_middle_peice_v3.stl |
| Pipe_Rails_Small.stl |
| Pipe_Rails_version_1.stl |
| Pipe_Rails_version_2.stl |
| Pipe_Rails_version_3.stl |
| Pipe_Stairs.stl |
| Pipe_Stairs_v.2.stl |
| Pipe_Walkways_2.5.stl |
| Pipe_Walkways_90_degree.stl |
| Pipe_Walkways_double.stl |
| Pipe_Walkway_pillar_3.stl |
| Pipe_Walkway_pillar_5.stl |
| Pipe_Walkway_scaffolding_25.stl |
| Pipe_Walkway_scaffolding_no_pipe.stl |
| Pipe_Walkway_scaffolding_pipe.stl |
| Pipe_Walkway_scaffolding_pipe_height.stl |
| Pipe_Walkway_scaffolding_pipe_height_pipe.stl |
| Pipe_Walkway_Single.stl |
| SHOWCASE_MODEL_do_not_print..stl |
| T_connector_pipe_v3.stl |
| Y-Connector.stl |
