I wanted some smaller boxes to store electronics components in a more organized manner. I didn't see anything out there that quite fit my needs, so I made my own!
I've also added a lattice that you can insert into your drawer or in the spot you plan to store these. That way they all line up next to each other perfectly.
Should be printable without supports as well!
| 1x1_Lattice_Base.stl | 4.0KB | |
| 3x3x2_Box.stl | 35.9KB | |
| 3x3x2_Lid.stl | 38.9KB | |
| 3x3x4_Box.stl | 38.3KB | |
| 3x3x4_Lid.stl | 38.9KB | |
| 3x5x2_Box.stl | 34.6KB | |
| 3x5x2_Lid.stl | 32.7KB | |
| 3x5x4_Box.stl | 41.6KB | |
| 3x5x4_Lid.stl | 32.7KB | |
| 5x5x2_Box.stl | 39.8KB | |
| 5x5x2_Lid.stl | 29.4KB | |
| 5x5x4_Box.stl | 47.6KB | |
| 5x5x4_Lid.stl | 29.4KB |
