Modular Spray Can Rack 3D Printer Model
The file 'Modular Spray Can Rack 3D Printer Model' is (stl) file type, size is 88.9KB.
The file 'Modular Spray Can Rack 3D Printer Model' is (stl) file type, size is 88.9KB.
Easy to print modular spray can rack. No supports needed. The rack can be fitted to a wooden or MDF base using self tapping screws and the sides and brackets can be fastened with M3x15 or M3x25* screws and nuts. The sides will need to be glued to the horizontal "gasket like" part but the parts feature dove tail cuttings to make this easier.
The tri-hexagonal pattern was obtained by using a top and bottom skin height of zero in Cura, along with a wall width of 4mm. You can use your preferred infill (I set it to 50% with a 0.8mm nozzle) to get your preferred pattern. I wish Cura had a honey comb infill pattern.
If you like the design, print it and find it useful, please share your make.
*you can tie two modules side by side using a single pair of screws.
| CanHolder70mm.stl | 114.9KB | |
| LeftSide.stl | 50.7KB | |
| MountingBracket.stl | 84.5KB | |
| RightSide.stl | 50.7KB |
