A solder roll holder and holders for just about everything you need for basic soldering work.
Split into modules for easier printing.
Module 1: Holds flux can, flux pen, tweezers and brushes
Module 2: Solder roll, desoldering braid and desoldering pump
Module 3: Solder iron holder. Designed for the Velleman STANDLC
Module 4: Metal wool cup and spare solder tips
Module 5: Solder paste can, syringes and spare syringe tips
Also start and stop modules.
Everything is customizable in the scad file, Solder Dispenser n Tool Holder.scad.
This is the only scad file you have to touch, but all .scad files are needed to produce the output in OpenSCAD.
There are many variables (with poor commenting) and no error checking. Not all values are sane, so check the output thoroughly.
Thanks to Charles R. for the dovetail module.
Good luck!
/jon
PS
Thingiverse doesn't render my stl:s, but they are there with the basic parameters.
Updates:
10/12 -20 Added slot for desolder braid roll
| dovetail.scad | 4.0KB | |
| module1.scad | 2.3KB | |
| module2.scad | 2.8KB | |
| module3.scad | 1.1KB | |
| module4.scad | 1.5KB | |
| module5.scad | 3.1KB | |
| Solder_Dispenser_n_Tool_Holder.scad | 4.6KB | |
| Solder_Dispenser_n_Tool_Holder.stl | 2.9MB | |
| Solder_Dispenser_n_Tool_Holder_mod1.stl | 804.8KB | |
| Solder_Dispenser_n_Tool_Holder_mod2.stl | 397.2KB | |
| Solder_Dispenser_n_Tool_Holder_mod3.stl | 49.5KB | |
| Solder_Dispenser_n_Tool_Holder_mod4.stl | 664.9KB | |
| Solder_Dispenser_n_Tool_Holder_mod5.stl | 1.0MB | |
| Solder_Dispenser_n_Tool_Holder_startmod.stl | 24.0KB | |
| Solder_Dispenser_n_Tool_Holder_stopmod.stl | 19.3KB | |
| startmodule.scad | 433.0B | |
| stopmodule.scad | 460.0B |
