Used the design from @stanoba and adapted it to have space for 15mm thick tapes. Also widened the the open window so it matches for our usage on our manual PnP machine Powatec Expert II.
Added a baseplate which slides on the base plate of the PnP machine (61mm x 6mm cross section) and devided it into three baseplates with 7 8mm feeders each with a numbered label attached. Other feeders can be slided on.
The baseplate has a hole underneath to feed the empty tape back.
| base_label1.stl | 78.6KB | |
| base_label1_numbers.stl | 75.5KB | |
| base_label2.stl | 110.0KB | |
| base_label2_numbers.stl | 106.5KB | |
| base_label3.stl | 136.6KB | |
| base_label3_numbers.stl | 132.7KB | |
| smd_feeder.scad | 1.6KB | |
| smd_feeder_12x15mm_Eii.stl | 8.3KB | |
| smd_feeder_16x15mm_Eii.stl | 8.3KB | |
| smd_feeder_24x15mm_Eii.stl | 8.3KB | |
| smd_feeder_8x15mm_Eii.stl | 8.3KB | |
| smd_feeder_Base_Powatec_Expert_II.scad | 2.9KB | |
| smd_feeder_Base_Powatec_Expert_II.stl | 12.0KB |
