Finally got around to finishing this.
I made several different options so it can be configured in many ways.
Also included a Blender file of a standard section with pre-positioned cubes in separate layers that can be used to delete any tabs, slots, or walls easily using either Difference or Union Boolean options.
If I have any other ideas, I will add them, but will no longer be replacing core sections.
I made these as big as I could while having them fit on my Ender 3 V2, but I see no reason why they couldn't be scaled to up or down a little as long as X/Y proportions are maintained, and all pieces are scaled equally.
(Note: On MY Ender, a full section with a tab on the end needs to be rotated 90 degrees, and positioned 2mm off center towards the left to fit and print properly or the right edge will go off the bed)
Included a screenshot, a Blender file and an stl of what I came up with for my drawer using several customizations.
The stl is really just for rendering though.
Best approach would be to export individual stl's out of the Blender file to get pieces that aren't included here.
I can add more upon request.
| Divider_Wall.stl | 684.0B | |
| Horizontal_Extended_Front_Left_End.stl | 293.8KB | |
| Horizontal_Extended_Front_Right_End.stl | 331.7KB | |
| Horizontal_Extended_Left.stl | 238.3KB | |
| Horizontal_Extended_Right.stl | 241.2KB | |
| Modular_Silverware_Organizer.blend | 5.6MB | |
| Modular_Silverware_Organizer_6_Std_Trays_Plus_Extended_.blend | 3.2MB | |
| My_Drawer.blend | 2.3MB | |
| My_Drawer.stl | 1.2MB | |
| My_Drawer_With_Grab_Assist.blend | 2.7MB | |
| My_Drawer_With_Grab_Assist.stl | 1.4MB | |
| Section_Customizer.blend | 1.1MB | |
| Standard.stl | 192.3KB | |
| Standard_With_Divider_Slots.stl | 209.8KB | |
| Vertical_Rear.stl | 183.1KB | |
| Vertical_Rear_Left_End.stl | 109.1KB | |
| Vertical_Rear_Right_End.stl | 253.8KB | |
| Widened_Divider.stl | 1.3KB | |
| Widened_Divider_Half.stl | 1.3KB |
