1-Cut your panels at the desired dimensions
2-Drill 44 mm diameter holes in the corners with an hole saw
3-Insert connectors' low part on wooden cleats (27x27mm) at the height you need, then hold them with wood screws
4-Fit the panel and the connectors' upper parts
5-Finish your shelf by adding the foot (patin) and the top part (capuchon)
| capuchon.STL | 183.5KB | |
| patin.STL | 409.7KB | |
| Support_pied_inf.STL | 2.5MB | |
| Support_pied_sup.STL | 2.4MB |
