I needed shock stand to fill my shocks and a rack to store tires so i designed this to do both.
Its modular, easy to assemble and does not need any other hardware.
You can still use 3 or 4mm wide metal rods if you wish, i added adapters for them.
The shock stand plate has pockets for screw management. The plate itself connects to the tire rack with the help of pins, and has holes to drop some glue to secure them in place. That way the pins always stay with the plate. The rack has holes on the top and bottom side - so you can put the plate away under it and keep it out of sight, or you can just flip the rack upside down an use it as a stand that way.
Enjoy!
| bar_X4.stl | 13.8KB | |
| Insert_for_3mm.stl | 31.4KB | |
| Insert_for_4mm.stl | 40.2KB | |
| pin_X4.stl | 39.5KB | |
| Shock_stand.stl | 333.9KB | |
| Side_X2.stl | 50.5KB |
