Modular Penzeys Spice Storage Rack 3D Printer Model
The file 'Modular Penzeys Spice Storage Rack 3D Printer Model' is (stl,f3d) file type, size is 149.9KB.
The file 'Modular Penzeys Spice Storage Rack 3D Printer Model' is (stl,f3d) file type, size is 149.9KB.
This rack was designed to fit inside a 24in W x 12in D kitchen cabinet. To fill the cabinet shelf it requires three sets of bottoms. The tops are optional and are used to prevent spice jars from being knocked off the organizer when grabbing a spice from behind.
The 55mm+ wide racks were designed to fit Penzeys spice jars A, B, C, G, H. It will also fit most small and medium spice jar sizes.
The holes in the design are to allow you to mount the various pieces together as you see fit with M3 screws.
This rack was designed to be printed as fast as possible with the most strength while minimizing the filament necessary.
| 45mm_x_192mm_Top.stl | 18.2KB | |
| 45mm_x_192mm_x_10mm_Bottom.stl | 53.0KB | |
| 45mm_x_192mm_x_17mm_Bottom.stl | 53.1KB | |
| 55mm_x_192mm_Closed_Sides_Top.stl | 18.0KB | |
| 55mm_x_192mm_Sides_Open_Top.stl.stl | 18.2KB | |
| 55mm_x_192mm_x_27mm_Bottom.stl | 52.4KB | |
| 55mm_x_192mm_x_47mm_Bottom.stl | 52.1KB | |
| 80mm_x_192mm_x_60mm_Bottom.stl | 101.5KB | |
| Spice_Organizer.f3d | 85.9KB |
