Modular Multi Purpose Electronic Container (MMPEC) 3D Printer Model Free Download

Description Files (7)

Summary

Why?

I don't like square boxes so I made this Amazon Alexa/Amazon Echo Dot inspired kind of design for my DIY projects.

The Project

It has been design to be modular. You can combine the modules you need for your project. Just snap them together in you desired order. If you are a bit crazy like me you can print the different modules in different colors.

The bottom module is design to fit a breadboard directly into the slot and has an opening for the usb cable. I personally use NodeMCU and barebone ESP8266 controllers with and without batteries.

Currently I have about 10 boxes around my farm :)

Tips

Important:

LED part: You should print the led part in translusent PLA to make the led light shine.
Lid part: The lid should be flipped up-side-down before printing.
Air part: Enable "Detect thin walls" if you have this setting.

Contributions

If you have any suggestions for improvements or additions, please let me know.

I you like this work please support me on Patreon:
https://www.patreon.com/sorenso

Other places

You can find my Youtube channel here: https://youtube.com/sorenso
You can find some of my images at my Flickr page: https://www.flickr.com/photos/159436546@N07/
You can find some of my open source code at my Github page: https://github.com/5orenso
And finally my blog: https://litt.no/

Thanks for visiting :)

mmpec-v5-air.stl	5.2MB
mmpec-v5-batt.stl	159.4KB
mmpec-v5-bottom.stl	140.5KB
mmpec-v5-led.stl	242.5KB
mmpec-v5-lid.stl	99.8KB
mmpec-v5-oled.stl	301.1KB
mmpec-v5-spacer.stl	139.5KB