NEW! as of June 17.
This is now a complete modular rocket system!
Pick a nosecone, body tube(s), fincan, nosecone coupler, and voila! A semi custom printable rocket!
I plan to be adding new sections on a regular basis so check back often! Feel free to leave feedback if there is some feature you'd like to see that isn't up yet :)
Important dimensions to make compatible modules:
Tube Outside Diameter - 1.75in
Tube Inside Diameter - 1.667in
Coupler Tube Outside Diameter (tight): 1.663in
Coupler Tube Outside diameter (looser): 1.659in
NOTE: The designs are closely based on the Legacy design and should work well, but many of them are still untested. I'm working on it, though.
| 1.75inx18mm_Angled_2xCluster_Fincan.STL |
| 1.75inx18mm_Standard_Fincan.STL |
| 1.75inx18mm_Twister_Fincan.STL |
| 1.75inx24mm_Standard_Fincan.STL |
| 1.75inx24mm_Twister_Fincan.STL |
| 1.75in_Blank_Fincan.STL |
| 1.75in_body_tube.STL |
| 1.75in_Body_Tube_With_Lug.STL |
| 1.75in_modular_rocket_Solidworks_2010.zip |
| 1.75in_Nosecone_Conical.STL |
| 1.75in_Nosecone_Coupler.STL |
| 1.75in_Nosecone_Hemispherical.STL |
| 1.75in_Nosecone_Ogive.STL |
| 1.75in_Nosecone_Spherical.STL |
| Legacy_Printable_Rocket_Files.zip |
