Modular Magazine Storage 3D Printer Model
The file 'Modular Magazine Storage 3D Printer Model' is (stl) file type, size is 483.5KB.
The file 'Modular Magazine Storage 3D Printer Model' is (stl) file type, size is 483.5KB.
Modular magazine storage:
AR-15: 9 AR-15 magazine (molded from P-mag )
Double stack: 15 Double stack magazines (molded from M&P 9)
Single stack: 20 Single stack magazines (molded from 1911 9mm)
Shotgun: 4, 25 round boxes of 2 3/4" shotgun shells.
Each unit dovetails together.
They can be used in a cart or a in a safe
I used 20% fill for PLA it seemed to work good.
Each unit uses about .5 KG of filament.
Measures: 280mm x150mm
You may have to move it around in your slicer to make it fit
11/27/18 edit
The prints pictured were done in TPU they came out beter then the PLA.
I opened up the shotgun module a little to fit the boxes easyer.
I used CR10 printer and YOYI 3D Flexible TPUfiliment. I could get two prints out of one spool.
Glock mags will fit in the TPU version
Settings were:
Print bed 30c
Nozzel 207c
No retraction
Fill 20-30% Depending on how firm you want them
Speed 40MM/s
It was a slow print took about 72 hours but I get consistant results.
| ar_15_v5.stl | 184.6KB | |
| Double_Stack_v1.stl | 1.1MB | |
| Pistol_v2.stl | 130.2KB | |
| Shot_gun_v2.stl | 121.9KB | |
| singal_stack_v6.stl | 1.4MB |
