Had too many pictures from the recent travels, so decided to make a modular frame to hold them up. If printed in PLA would recommend using super glue to fix all pieces together, otherwise if in ABS then acetone would work
Also if you want to do anything fancy your best bet is to edit the provided SolidWorks assemblies
| 1.jfif | 370.9KB | |
| Frame_1x2_v10a.SLDASM | 78.2KB | |
| Frame_1x2_v10a.stl | 61.4KB | |
| Frame_1x3_v10a.SLDASM | 82.2KB | |
| Frame_1x3_v10a.stl | 92.1KB | |
| Frame_1x4_v10a.SLDASM | 82.2KB | |
| Frame_1x4_v10a.stl | 122.7KB | |
| Frame_2x1_v10a.SLDASM | 83.3KB | |
| Frame_2x1_v10a.stl | 61.4KB | |
| Frame_2x2_v10a.SLDASM | 89.7KB | |
| Frame_2x2_v10a.stl | 122.7KB | |
| Frame_3x1_v10a.SLDASM | 86.4KB | |
| Frame_3x1_v10a.stl | 92.1KB | |
| Frame_3x3_v10a.SLDASM | 103.8KB | |
| Frame_3x3_v10a.stl | 276.1KB | |
| Frame_4x1_v10a.SLDASM | 89.3KB | |
| Frame_4x1_v10a.stl | 122.7KB | |
| Frame_4x4_v10a.SLDASM | 115.2KB | |
| Frame_4x4_v10a.stl | 490.7KB | |
| Single-photo_v10a.SLDPRT | 138.9KB | |
| Single-photo_v10a.STL | 30.7KB |
