Modular Industrial Pendant Lamp 3D Printer Model
The file 'Modular Industrial Pendant Lamp 3D Printer Model' is (stl) file type, size is 111.8KB.
The file 'Modular Industrial Pendant Lamp 3D Printer Model' is (stl) file type, size is 111.8KB.
Inspired by the vintage/industrial design pendant lamps that can be found in any lighting shop today. This design allows the light fixture to be expandable from 1 to multiple lighting points in a straight line.
The light fixture of the necessary length can be assembled by clicking the modules together with connectors. The two ends can be sealed by a clickable terminator. Each module is 180 mm long and serves one lighting point. I have made a fixture of 6 modules.
The length of the electrical cable from each module to its lamp socket can be adjusted with a clamp. I've used standard black textile cable with a diameter 8 mm in combination with E27 black industrial lamp socket and LED filament light bulbs from the local DIY shop.
To hang the fixture to the ceiling, screw the fixation blocks in a straight line on the ceiling and slide the fixture over the fixation blocks. I applied one fixation block per module.
| Cable_clamp.stl | 28.2KB | |
| Cable_feed-trough_bolt.stl | 137.6KB | |
| Cable_feed-trough_nut.stl | 148.0KB | |
| Fixation_block.stl | 29.6KB | |
| Module_180.stl | 53.3KB | |
| Module_connector.stl | 8.9KB | |
| Module_terminator.stl | 5.0KB |
