A modular wine rack to fit your needs of wine storage
Its easy to print and to assemble. You can print any combination of rings and half rings. Use the H columns to join rings side by side and use the half columns for the outer limits.
I suggest you print a test first to check the tolerances, you want it to be tight so depending on the printer you might need to tweak the flow or expand/contract horizontal values.
The rings have a 90 mm diameter which should be enough for most kind of wine bottles
I designed and printed in PLA around 2 years ago and everything is still holding strong, only now remembered to upload it.
Enjoy
Column.stl | 160.0KB | |
HalfColumn.stl | 80.4KB | |
HalfRing.stl | 68.1KB | |
Ring.stl | 103.4KB |