Modular Hobby Paint Rack – Large Straight 3D Printer Model
The file 'Modular Hobby Paint Rack – Large Straight 3D Printer Model' is (stl) file type, size is 329.0KB.
The file 'Modular Hobby Paint Rack – Large Straight 3D Printer Model' is (stl) file type, size is 329.0KB.
This is the first in a line of modular paint racks to store and organize hobby paints. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to hold paints such as Miniataire, GW and others!
Capacity:
Dropper style bottles can be stored in the upright or inverted position. The Reaper paints in the upright position have a little play in them but will still be held without falling over or getting trapped. I designed it more for the inverted position as that is the way I hold my paints to prevent tip dry out.
I will add assembly details in an update but you will need to print the following to assemble one unit:
One of the following:
Two of the Following:
Optional - Four of the following:
If you use the Tamiya shelves or want to store your dropper bottles upright the risers will attach to the rear of the shelves to raise the bottle height. You will need two per shelf and one will need to be rotated 180 to have the holes line up with the pins.
If a piece has a left and right side you will need to glue them together using the tabs. Unfortunately I didn't have a print bed big enough to handle a single piece and had to do this. Once you have joined all the left and right sides together you should have a complete kit and can be assembled with the tabs and slots. I would also suggest glue just to be safe in case you have to move it even though the fit should be pretty tight.
Hope you enjoy this and it makes your painting desk a little tidier.....I know mine needed it!
Other units in the series:
Inside Corner - https://www.thingiverse.com/thing:2543779
Outside Corner - https://www.thingiverse.com/thing:2588073
Small Straight - https://www.thingiverse.com/thing:2549451
Tool Holder - https://www.thingiverse.com/thing:2601038
Upcoming:
Revision History:
Happy Printing!!!
| BottomFrontSupport-Left.stl | 55.7KB | |
| BottomFrontSupport-Right.stl | 55.7KB | |
| BottomRearSupport-Left.stl | 3.0KB | |
| BottomRearSupport-Right.stl | 3.0KB | |
| CenterSupportBottom.stl | 2.6KB | |
| CenterSupportTop.stl | 684.0B | |
| LeftSide.stl | 10.1KB | |
| RearSupport-Left.stl | 3.0KB | |
| RearSupport-Right.stl | 3.0KB | |
| RightSide.stl | 10.1KB | |
| Riser1.stl | 19.8KB | |
| Riser2.stl | 19.8KB | |
| Shelf1and3-Left-Minitaire.stl | 68.4KB | |
| Shelf1and3-Left-Tamiya.stl | 99.9KB | |
| Shelf1and3-Left-Vallejo.stl | 142.5KB | |
| Shelf1and3-Right-Minitaire.stl | 69.2KB | |
| Shelf1and3-Right-Tamiya.stl | 100.5KB | |
| Shelf1and3-Right-Vallejo.stl | 143.6KB | |
| Shelf2-Left-Minitaire.stl | 62.4KB | |
| Shelf2-Left-Tamiya.stl | 99.1KB | |
| Shelf2-Left-Vallejo.stl | 140.3KB | |
| Shelf2-Right-Minitaire.stl | 61.6KB | |
| Shelf2-Right-Tamiya.stl | 98.3KB | |
| Shelf2-Right-Vallejo.stl | 139.1KB | |
| Shelf4-Left-Minitaire.stl | 62.8KB | |
| Shelf4-Left-Tamiya.stl | 46.8KB | |
| Shelf4-Left-Vallejo.stl | 88.4KB | |
| Shelf4-Right-Minitaire.stl | 62.0KB | |
| Shelf4-Right-Tamiya.stl | 46.8KB | |
| Shelf4-Right-Vallejo.stl | 87.4KB |
