Featured on MyMiniFactory!
Also see The HIVE - Stackable Hex Drawers
The HIVE is a fully stackable version of these modular hex drawers
This is an extension of my Modular Wine Rack.
I noticed my wine rack could also make great stackable drawers.
The hex modules are 75 mm long and 75 mm wide.
 |  |  |  |  |  |  |
|---|
Update 2/19/2017
I removed the stacking piece because it is a waste of filament compared to my HIVE drawers which interlock. If you need to stack in a honeycomb pattern I recommend you print the HIVE drawers instead.
Update 06/07/2016
Later in the day I uploaded the module with a back and the drawer with a separator.
Update 06/08/2016
I uploaded both the voronoi module and the voronoi module with a back. I also uploaded dual modules.
Update 06/09/2016
I uploaded the voronoi dual modules and the dual modules with a back.
Update 06/15/2016
I uploaded the module stacker. This addition makes for easier stacking.
Update 08/2/2016
I uploaded the wall mounting module with the tab. The tab is reversible so that the module can be mounted from the inside or the outside. I made a special module for mounting with tabs on the inside. It is 3mm taller than the others. I also included another drawer.
Update 09/13/2016
I uploaded a larger module and drawer. 100 mm in height and width.
| dual_hex_modules.stl | 4.6KB | |
| dual_hex_modules_with_back.stl | 18.6KB | |
| hexagonal-winerack-voronoi.stl | 233.5KB | |
| hex_drawer_FIXED.stl | 6.1KB | |
| Hex_Drawer_LARGE.stl | 7.3KB | |
| hex_drawer_with_seperation_FIXED.stl | 7.7KB | |
| hex_drawe_with_vertical_seperation.stl | 6.9KB | |
| hex_module.stl | 2.4KB | |
| Hex_Module_LARGE.stl | 9.5KB | |
| hex_module_with_back.stl | 9.5KB | |
| voronoi_dual_hex_module.stl | 363.9KB | |
| voronoi_hex_module.stl | 193.4KB | |
| voronoi_hex_module_with_back.stl | 200.5KB | |
| wall_mod_for_inside_tab_mounting.stl | 50.8KB | |
| wall_mounting_module.stl | 46.7KB | |
| wall_mounting_tab.stl | 144.0KB |
