Modular Gaming Hills – Linear Pieces 3D Printer Model
The file 'Modular Gaming Hills – Linear Pieces 3D Printer Model' is (stl) file type, size is 4.2MB.
The file 'Modular Gaming Hills – Linear Pieces 3D Printer Model' is (stl) file type, size is 4.2MB.
Update 2018-10-13 Hill-linear-high-L 1&2 is fixed to align with other hills.
Produced with the awesome support from my Patrons!
This is a set of pieces that fit with the regular Modular gaming hill. But instead of corner pieces, this is linear pieces that goes between them.
There are holes for magnets. The size is 3mm, use a drill if your magnets are larger. Be warned, I can't lift hills without them falling apart if they are fitted with magnets. If you need that, use the clips or glue them together.
I print these with 5% infill.
Tiers starting on $2 per month, to get all terrain I create. I work fulltime now. Merchant tier also available. Regular voting to see what I should do next. Generous loyalty rewards to get my older content.
https://www.myminifactory.com/users/terrain4print#/
Want more like this, check my shop:
https://www.myminifactory.com/users/terrain4print?show=store#/panel2-5
| hill-box-high.stl | 80.4KB | |
| hill-linear-high-L_001.stl | 1.4MB | |
| hill-linear-high-L_002.stl | 1.8MB | |
| hill-linear-high-S_000.stl | 1.6MB | |
| hill-linear-high-S_001.stl | 964.9KB | |
| hill-linear-slope-L_001.stl | 276.0KB | |
| hill-linear-slope-L_002.stl | 688.9KB | |
| hill-linear-slope-L_003.stl | 605.6KB | |
| hill-linear-slope-L_004.stl | 736.5KB | |
| hill-linear-slope-S_001.stl | 376.3KB | |
| hill-linear-slope-S_002.stl | 588.7KB | |
| hill-linear-slope-S_003.stl | 311.7KB |
