Modular Fish Guard Frame For 10 & 12mm Glass 3D Printer Model
The file 'Modular Fish Guard Frame For 10 & 12mm Glass 3D Printer Model' is (stl) file type, size is 522.1KB.
The file 'Modular Fish Guard Frame For 10 & 12mm Glass 3D Printer Model' is (stl) file type, size is 522.1KB.
Update 20.12.2023: All Parts are now 2mm thick as the original version with 1mm was too fragile. Happy printing!
I also added a "Fragboard" as a holder while gluing your frags as well a 200 and a 120mm version without cutouts for 10mm glass.
This is a frame i designed to save my fish from jumping out of the water. It's optimized for my Aqua Medic Xenia 100 with a direct surface of 100 x 65cm, 10mm side and back glasses and a 12mm front. Due to the modular design the parts can easily be combined for other dimensions.
The parts are 200 or 120mm long, so they fit on an Ender 3.
The parts with cut outs can be closed with inlays or you can use the cut outs for a hanging frag rack (see my other design) or whatever...
The cut outs are 400m wide (440mm wider version) and will leave 11mm (14mm) between glas and frame.
Feel free to print your own frame and leave me like or even a comment!
I will add an inlay version with included cable management soon. And maybe a inlay for the wider cut outs... depends on time and request... ;)
UPDATE 26.05.2022: Some Parts for 12mm glass added!
| Edge_200_1010_2_full.stl | 263.5KB | |
| Edge_200_10_2_1Cutout.stl | 258.1KB | |
| Edge_200_10_2_CablePin.stl | 275.6KB | |
| Edge_200_1210_2.stl | 371.2KB | |
| FoodTube.stl | 97.4KB | |
| Fragboard_200_12.stl | 245.1KB | |
| Inlay_10.stl | 23.9KB | |
| Inlay_12mm.stl | 23.9KB | |
| Inlay_Cable_10mm.stl | 49.0KB | |
| Inlay_Cable_12mm.stl | 49.0KB | |
| Side_120_10_2_Cutout.stl | 124.9KB | |
| Side_120_10_2_full.stl | 136.8KB | |
| Side_200_10_2.stl | 221.0KB | |
| Side_200_10_2_2Cutouts.stl | 197.7KB | |
| Side_200_12_2.stl | 395.8KB |
