I was in need to give additional support to a ergonomic keyboard from Gold-Touch. In addition there should be an organizer behind the keyboard.
Finally I created a multiple use basement. It is able to use a big insert for nearly any application. Further on it could come along with a flat insert.
There are basic inserts, where you can add your own shape for individual use.
The flat insert can be used to be a basement for eg. a brush holder, acrylic pens...
There is a second indent (76x76x2.5mm) in the front section, which also can be used to add a second support. So you might be able to create a stand for a biger item, whilst air brushing it.
It could be used from the front and from the side, as I did with the grinder holder.
Feel free to adopt as you like.
Would be happy to see your remixes here.
No commercial use, without my permission.
I printed without any support. The grinder holder was print with 10% infill.
Additional inserts:
Toolholder for Anxcubic I3-Mega
https://www.thingiverse.com/thing:4767165
| ModOrg-basicbig.STL | 3.6KB | |
| ModOrg-basicflat.STL | 19.0KB | |
| ModOrg-Box38x38x25.STL | 75.3KB | |
| ModOrg-businesscard.STL | 53.4KB | |
| ModOrg-flatM4.STL | 44.2KB | |
| ModOrg-grinderstand-3mm.STL | 503.0KB | |
| ModOrg-KeyboardSupport-26_5mm.STL | 312.8KB | |
| ModOrg-Office.STL | 154.8KB | |
| ModOrg-phonestand.STL | 96.4KB | |
| ModOrg-Support-32_5mm.STL | 11.8KB | |
| Modular-Desktop-Organizer.STL | 325.5KB |
