Modular Desk Clock 3D Printer Model Free Download

Description Files (16)

Summary

What time is it? It's nope o'clock !

A small & simple clock for your desk: 3 blocks, 5 faces, 4 hands: 60 variations !

Select the parts and create your own clock !

3 blocks : corner, flat or hexa
5 faces : dots, dashes, numbers, “ho no” or “it's nope o'clock”
4 hands sets : round, pointy, line or hexa
one extra part to hide the center of the clock : the biboutz
Mix and match the parts, use several colors or not, and enjoy your desk clock :)

Recommendations for printing

use 0.05mm resolution for clock hands, biboutz and the face with numbers
use 0.20mm for all the other parts
don't forget to add supports for the blocks

Gravity

You'll notice gravity exists on earth and therefore, you'll need to add additional weight on the “corner” block for that it stays in place. there are 2 spaces in the block where you can add some coins to add some weight. Tested with two 50cents coins, it can also help you to store money for emergencies at the coffee machine.

Closing the clock

Secure the clock back with a little bit of masking tape around the rods to make them a little bit thicker and stay in place.

Mechanism

Use the quartz clock mechanism with a small shaft ( 55x55x 13mm) like this one : https://www.amazon.fr/gp/product/B08SJDZHLT

Font

If you like the font I used for the face, you can download it here for free (Yes, I made it)

https://weblog.redisdead.net/main/post/2018/08/01/Caturigas-une-fonte-super-fine-et-mega-grasse

biboutz.stl	835.2KB
Face_dash.stl	234.3KB
Face_dots.stl	359.3KB
Face_ho_no.stl	281.7KB
Face_nope.stl	842.7KB
Face_numbers.stl	1004.6KB
Hexa_hands.stl	56.3KB
Line_hands.stl	101.3KB
Pointy_hands.stl	136.2KB
Round_hands.stl	123.1KB
Shape_corner.stl	203.6KB
Shape_corner_back.stl	1.3MB
Shape_flat.stl	208.6KB
Shape_flat_back.stl	1.3MB
Shape_Hexa.stl	177.3KB
Shape_Hexa_back.stl	1.7MB