Modular 3D-printer Enclosure Fully Printed 3D Printer Model
The file 'Modular 3D-printer Enclosure Fully Printed 3D Printer Model' is (STL,pdf) file type, size is 7.1MB.
The file 'Modular 3D-printer Enclosure Fully Printed 3D Printer Model' is (STL,pdf) file type, size is 7.1MB.
please consider downloading it from Makerworld so I can get free filament :)
https://makerworld.com/en/models/228666#profileId-361206
Modular 3D-printer enclosure fully printed
when printing ASA I get 30 °C in the enclosure at 20 °C room temperature
You need following screws/nuts
nut m3 ISO 4032
allen screw m3 x 6 ISO 4762
allen screw m3 x 10 ISO 4762
allen screw m3 x 12 ISO 4762
allen screw m3 x 16 ISO 4762
allen screw m4 x 25 ISO 4762
the panels are greenhouse polycarbonate panels thickness: 4.5 mm
(you can cut them with a knife)
For the hinges i recommend using ABS/ASA
| 10_Ecke_hinten_oben_links.STL | 664.4KB | |
| 11_Ecke_hinten_oben_rechts.STL | 728.9KB | |
| 12_Scharnier_Rahmen.STL | 435.4KB | |
| 13_Scharnier_Tür.STL | 295.6KB | |
| 14_Ecke_Türe_oben_links.STL | 219.0KB | |
| 15_Ecke_Türe_oben_rechts.STL | 169.6KB | |
| 16_Ecke_Türe_unten_rechts.STL | 124.7KB | |
| 17_Ecke_Türe_unten_links.STL | 263.9KB | |
| 18_Kante_riegel_100.STL | 288.4KB | |
| 18_Kante_riegel_150.STL | 288.4KB | |
| 18_Kante_riegel_200.STL | 288.4KB | |
| 18_Kante_riegel_50.STL | 288.4KB | |
| 19_Riegel_Rahmen.STL | 311.0KB | |
| 1_Ecke_vorne_unten_links.STL | 249.0KB | |
| 20_Riegel_Bügel.STL | 359.1KB | |
| 21_Riegel_stange.STL | 141.9KB | |
| 22_Riegel_Tür.STL | 304.0KB | |
| 23_Bildschirmhalterung.STL | 401.8KB | |
| 2_Kante_100mm.STL | 145.2KB | |
| 2_Kante_150mm.STL | 145.2KB | |
| 2_Kante_200mm.STL | 145.2KB | |
| 2_Kante_50mm.STL | 145.2KB | |
| 3_Ecke_vorne_oben_links.STL | 414.7KB | |
| 4_Ecke_vorne_oben_rechts.STL | 275.5KB | |
| 5_Ecke_vorne_unten_rechts.STL | 261.4KB | |
| 6_Kante_flach_100mm.STL | 143.6KB | |
| 6_Kante_flach_150mm.STL | 143.6KB | |
| 6_Kante_flach_200mm.STL | 143.6KB | |
| 6_Kante_flach_50mm.STL | 143.6KB | |
| 7_Kante_doppelt_100mm.STL | 177.4KB | |
| 7_Kante_doppelt_150mm.STL | 177.4KB | |
| 7_Kante_doppelt_200mm.STL | 177.4KB | |
| 7_Kante_doppelt_50mm.STL | 177.4KB | |
| 8_Ecke_hinten_unten_links.STL | 300.9KB | |
| 9_Ecke_hinten_unten_rechts.STL | 255.9KB | |
| Modular_3D-printing_enclosure.STL | 14.0MB | |
| Modular_3D-printing_enclosure_.pdf | 374.9KB | |
| print_plate_corners.pdf | 108.0KB | |
| print_plate_corners.STL | 3.8MB |
